Filstar L (XP3) Motor w/O-rings

Filstar L (XP3) Motor w/O-rings

Filstar L Motor/Coil/Housing & O-Ring Assembly Fits API & Rena Filstar 3

On sale: ~~$105.95~~ $89.95

Questions about this item? Ask here.

Part Number: 861505-00

Availability: Limited Supply

Quantity

Description
Questions and Answers

Original replacement motor for the Filstar Large and XP3. Includes a canister O-ring and impeller cover seal. It does not include the Quick Disconnect Unit, rotor/impeller or impeller cover. This motor also replaced the original Rena Filstar XP3 Motor.

Replace if broken or if impeller does not spin when motor is plugged into an electrical outlet. Motor replacement does not fix low flow unless the actual motor housing is damaged. Replace this only if it is completely dead.

Q: Does this include the impeller?

Asked by: devo - 2/13/2015

A: This does not include the Rotor/Impeller. Item 722C1

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Administrator (5/19/2015)

Q: Will this also fit the xp2?

Asked by: Dano - 4/14/2016

A: It will fit the the cover fine. You may notice a difference in flow or noise. These motors are all matched to the number of baskets and the power of the rotor impeller to provide reliable startup and quiet operation. However you can generally go up or down one level with the motor or rotor/impeller without affecting performance.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Administrator (4/15/2016)

Q: Does this include the impeller?

Asked by: devo - 2/13/2015

A: Description on web site:
Original replacement motor for the Filstar Large and XP3. Includes a canister O-ring and impeller cover seal. **It does *not* include the Quick Disconnect Unit, *rotor/impeller* or impeller cover.** This motor also replaces the original Rena Filstar XP3 Motor.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (4/15/2016)

Q: I need the part where the hosing locks into the housing. The red shut off lever broke. Is that included here?

Asked by: Kate - 9/10/2019

A: You want the Quick Disconnect. This connects the tubing to the Motor. ITEM 720D just put the code in the search box on the right of most pages.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (9/11/2019)

Q: I am looking to purchase the complete motor assembly (model 851201-02) for an RENA Filstar XP2. Is this the correct product?

Asked by: Gord - 8/3/2020

A: You should be looking for Filstar M (two baskets)
API Filstar M Motor Replacement & O-Rings #25 for API & Rena Filstar 2
Your Price: $169.95
Questions about this item? Ask here.
Part Number: 851505-00
Availability: Limited Supply

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (8/5/2020)

Q: is this part include the blue cover on top . xp3 L Thank you

Asked by: tran - 12/20/2020

A: This is the entire motor including "the top cover". It consists of the two halves of the motor, top, and bottom. In the bottom half you have the coil and cord attached to the motor which housed inside a waterproof chamber. The motor also includes a canister Oring and Impeller cover seal.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (12/21/2020)

Q: do you sell just the O-ring for xp3? thanks.

Asked by: Jose dideles - 1/18/2021

A: This comes only as a kit, impeller cover O-ring and Canister Seal Item 720G1

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (1/20/2021)

Q: water start to leak and dripping out from the power cord, is this the part i need to replace ? please let me know. Thank you

Asked by: Kelvin Hua - 4/30/2021

A:

Water coming out the power cord area or the seam between the two halves of the motor is usually related to leaking around the quick disconnect. What happens is that water bubbles up around the QD into the area where the QD is located. If you notice there is "V" shaped notch in this area. This carries water that leaks around this area into the center of the motor. If it leaks too much then it fills the center of the motor and eventually comes out the cord area or between the seam around the center of the motor.

The best fix is replacing the Orings on the QD or replacing the QD if you have a filter that is older. Other problems are damage in the well where the QD sits. Sometimes the prongs on the safety catch (look like goal posts) have sheared of corners from locking and unlocking the QD. Sometimes you can have damage to the top half of the motor housing where the two extension tubes of the QD sit as well.

You can test the Orings by putting a lot of vaseline or other water based silicone lubricant on the orings and then do a restart of the filter with an empty canister (proper restart method) to see if the canister fills all the way to the top. If so you have probably isolated the problem at the Orings. Item 720G is the gasket kit and item 720D is the QD.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (5/3/2021)

Q: When will this part be available?

Asked by: Robin A Becker - 6/5/2021

A: Usually 7-10 days.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (6/6/2021)

Q: How soon available?

Asked by: Joann Durham - 10/6/2021

A: 10-07-21: Back in stock. Limited availability. The Filstar Filter system was discontinued by Mars Fishcare in January of 2020. Parts only available now.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Administrator (10/8/2021)

Questions about this item? Ask here.

Dual Temp External Digital Thermometer Room & Inside Aquarium Fits All Sizes NEW

Dual Temp External Digital Thermometer Room & Inside Aquarium Fits All Sizes NEW

$11.95

Back Order.

Pond Care Pimafix, 64oz Treats 9500 US Gallons

Pond Care Pimafix, 64oz Treats 9500 US Gallons

$53.69

In Stock.

Rena OEM Utility/Fountain/Aquarium Pump 290gph/6.3ft lift, 6ft cord, 3yr warranty

Rena OEM Utility/Fountain/Aquarium Pump 290gph/6.3ft lift, 6ft cord, 3yr warranty

$29.95

In Stock.

Rena OEM Filstar XP Intake Extensions (x2) Plus Strainer Black

Rena OEM Filstar XP Intake Extensions (x2) Plus Strainer Black

$18.79

Very Limited Supply

API GH & KH Test Kit measures alkalinity

API GH & KH Test Kit measures alkalinity

$9.99

In Stock.

Chlorine & Heavy Metal Rem 16oz Treats 960 gal Removes Chlorine Makes Water Safe (COPY)

Chlorine & Heavy Metal Rem 16oz Treats 960 gal Removes Chlorine Makes Water Safe (COPY)

$12.99

In Stock.

[history_item_name]

[ITEMPRICE] ~~[ITEMPRICE]~~ [ITEMSALEPRICE] Sale

Clear

Copyright Rena Aquatic Supply. All Rights Reserved.

TOP