Original Inlet/Outlet Accessories included with New Filstars

API Rena Filstar XP Inlet and Outlet Accessories Kit 841564-API, old 720P

Your Price: $22.59

Questions about this item? Ask here.

Part Number: 720H

Availability: Limited Supply Fits All Filstar Models

Quantity

Description
Questions and Answers

Fits all versions of the Rena Filstar XP and API Filstar Filter

This is the complete inlet/outlet accessories kit that comes with the API Filstar external canister filter system. This is version 3 and includes the color coded inlet outlet accessories. If you need to upgrade several parts of your current system it is usually a better value to purchase the whole kit.

What's Included

Suction Cups (fits both Rena and API Filstar)
Accessory Clips (c clamps fits both Rena and API Filstar)
Inlet Pipe w/cap (fits both Rena and API Filstar)
Inlet Pipe Extensions (2 ea)
Inlet Strainer
Outlet Pipe w/Cap
Adjustable Outlet Sprayer w/deflector ("Goose Neck")

Q: Is there an extension part for the outlet tube/ jet?

Asked by: mary - 2/17/2018

A: The "jet outlet" you reference was from the original Rena Filstar. The API Filstar does not include a Jet outlet. If you have the old system you will need to replace the outlet system with the new outlet system which limits you to an adjustable Fan Sprayer outlet. The jet outlet and spraybar system were replaced with a simpler outlet system with fewer parts.

Was this answer helpful? 0 of 2 Customer(s) found this Answer helpful.

Answer provided by: Administrator (2/12/2020)

A: If you need to extend the discharge deeper into the tank you can purchase extra intake extension tubes (gray/blue) Item ACC840602-XP to extend deeper into the tank. The wider end of the extensions will fit on the discharge tube and the smaller end connects to the outlet sprayer. You may need to use some silicone glue on the sprayer and outlet tube to make sure you get a tight fit that stays in place.

You can paint these pieces to match the black discharge. Make sure you rough up the surface with sandpaper and use acrylic or epoxy enamel for best results. Let the surface dry at least 24 hours to allow the paint to dry and completely release any gases associated with the drying and hardening process.

Was this answer helpful? 0 of 2 Customer(s) found this Answer helpful.

Answer provided by: Administrator (2/19/2018)

Q: is your pricing in Canadian dollars ? Thanks

Asked by: Steve Walker - 2/8/2020

A: No, US Dollars. We are a US company.

Was this answer helpful? 0 of 2 Customer(s) found this Answer helpful.

Answer provided by: Administrator (2/12/2020)

Q: What size of tubing do I need for these parts?

Asked by: steve - 9/9/2020

A: We sell only the original Filstar Tubing 21mm ID x26 MM OD. We sell two versions 1 pair is 6ft (720T) and the other pair 5ft (item 841619-00).

Was this answer helpful? 0 of 2 Customer(s) found this Answer helpful.

Answer provided by: Administrator (9/10/2020)

Questions about this item? Ask here.

API Rena Nexx Filter Replacement Base Connector Kit

$9.99

Very Limited Supply

Add To Cart

API Tropical Fish Sinking Pellet Food 1.7oz for Angelfish, Tetras,Barbs & Discus

$6.59

In Stock.

Add To Cart

Circulating Pump 1321 gph for Aquariums 50-125 gal suction cup base

$19.95

In Stock.

Add To Cart

Rena OEM Pondmaster 1 ea filter 12in x 12in Polyester Coarse filter cut-to-fit works for many pond filters

$6.29

In Stock.

Add To Cart

Fountain Pump Low-Voltage, 93gph/30" lift, 12v AC, 6' cord w/transformer, 3yr Warranty

~~$16.95~~ $12.95 Sale

Also See Item RO320LV for Less Flow & Lift

Add To Cart

Fountain Pump & Light Kit Low-Voltage 70gph/10watt light, w12v AC transformers

$27.29

Also See Item RO400LT for More Flow & Lift

Add To Cart

API Rena Filstar XP Inlet and Outlet Accessories Kit 841564-API, old 720P

Q: Is there an extension part for the outlet tube/ jet?

Q: is your pricing in Canadian dollars ? Thanks

Q: What size of tubing do I need for these parts?

Related Items

Recently Viewed Items