0 item(s) in cart/ total: $0
> Rena >
Filstar Parts API > API / Rena Filstar S (XP1) Replacement Canister includes Feet, Basket
Filstar Canister Replacement
API / Rena Filstar S (XP1) Replacement Canister includes Feet, Basket
Questions about this item? Ask here.
See 1 Questions
Add to Cart
Questions and Answers
The canister replacement assembly for the API Filstar S or Rena Filstar XP1 external canister filter includes the canister, inner filter basket and rubber feet. This may need replacing if the canister is cracked or the rim is broken preventing a good seal to the motor. The canister brackets that hold the clips are molded into the side of the canister. If these brackets are broken off the canister may not seal.
To avoid breaking the canister brackets when attaching and closing the top of the filter to the canister always start with an empty canister and let the aquarium fill the canister. Make sure when replacing the basket assembly that the basket is lined up and seated to each other correctly. Also make sure the basket assembly is seated properly in the bottom of the canister. Failure to do so will result in broken clip(s) or broken bracket(s)on the canister itself.
Quick Fix for broken bracket
Electrical (zip) ties can be attached end to end to make a longer tie that will go over the the top of the filter and under the canister at the feet. The zip tie can then be tightened and along with the other clamps will usually hold the motor down on the filter canister until you can purchase a new canister.
what are the demensions of the canister,mainly the top?
The best place to get this answer if from the manufacturer, Mars Fishcare but they are approximately 9 inches square.
Was this answer helpful?
0 of 0
Customer(s) found this Answer helpful.
Answer provided by:
Rotor Impeller for Rena OEM 600S/600C Easy Replacement
Gravel Vacuum w/Auto Start for Tall and Mini-Aquariums extends 9.5 to 18in
Kink Free Flexible Tubing Smooth Bore/Inside/Outside 3/4" id 20ft roll
Rena OEM Rotor/Impeller for Rena OEM 320S/C
Fits Both RO320C and RO320S
Rena OEM Garden / Utility Water pump 2000gph, 16.4ft lift, 33' cord (COPY)
Rena OEM Mini-Pond | Circulating Pump 290gph/6.3ft lift, 12ft cord, UL, 3yr warranty
Ideal for Pond | Circulating Water | Aeration
Recently Viewed Items